It sounds like you're looking for information on how to use a manual Teray sealer. Teray sealers are typically used in packaging and sealing processes. Here's a basic guide to help you get started:

1. Preparation

• Read the Manual: Always refer to the manufacturer's manual for specific instructions related to your model.
• Set Up the Machine: Ensure the sealer is placed on a stable surface. Check that all components are properly assembled and connected.

2. Adjust Settings

• Temperature Control: Set the temperature according to the material you are sealing. Different materials (like plastic or foil) require different temperatures.
• Timer Setting: Adjust the timer based on the thickness of the material. This controls how long the sealing bars will heat.

3. Loading the Material

• Position the Material: Place the open end of the packaging material between the sealing bars. Make sure it is aligned properly to avoid uneven sealing.
• Check for Cleanliness: Ensure there are no wrinkles or contaminants in the sealing area that might affect the seal.

4. Sealing Process

• Activate the Sealer: Close the sealing bars firmly and activate the machine according to its design (e.g., by pressing a foot pedal or lever).
• Hold the Position: Keep the bars closed for the duration set on the timer to ensure a proper seal. Do not open them prematurely.

5. Post-Sealing

• Check the Seal: Once the sealing process is complete, open the bars and check the seal to ensure it's solid and even.
• Adjust if Necessary: If the seal is not satisfactory, adjust the temperature, timer, or pressure settings as needed and try again.

6. Maintenance

• Clean Regularly: Wipe down the sealing bars and surrounding areas to remove any residue or debris.
• Inspect for Wear: Regularly check for any signs of wear or damage to ensure the sealer remains in good working condition.

7. Safety Precautions

• Avoid Contact: Be cautious around the heating elements to avoid burns.
• Follow Manufacturer Guidelines: Adhere to all safety recommendations provided by the manufacturer.

  It sounds like you're looking for information on how to use a manual Teray sealer. Teray sealers are typically used in packaging and sealing processes. Here's a basic guide to help you get started:

  1. Preparation

• Read the Manual: Always refer to the manufacturer's manual for specific instructions related to your model.
• Set Up the Machine: Ensure the sealer is placed on a stable surface. Check that all components are properly assembled and connected.

• 2. Adjust Settings

• Temperature Control: Set the temperature according to the material you are sealing. Different materials (like plastic or foil) require different temperatures.
• Timer Setting: Adjust the timer based on the thickness of the material. This controls how long the sealing bars will heat.

• 3. Loading the Material

• Position the Material: Place the open end of the packaging material between the sealing bars. Make sure it is aligned properly to avoid uneven sealing.
• Check for Cleanliness: Ensure there are no wrinkles or contaminants in the sealing area that might affect the seal.

• 4. Sealing Process

• Activate the Sealer: Close the sealing bars firmly and activate the machine according to its design (e.g., by pressing a foot pedal or lever).
• Hold the Position: Keep the bars closed for the duration set on the timer to ensure a proper seal. Do not open them prematurely.

• 5. Post-Sealing

• Check the Seal: Once the sealing process is complete, open the bars and check the seal to ensure it's solid and even.
• Adjust if Necessary: If the seal is not satisfactory, adjust the temperature, timer, or pressure settings as needed and try again.

• 6. Maintenance

• Clean Regularly: Wipe down the sealing bars and surrounding areas to remove any residue or debris.
• Inspect for Wear: Regularly check for any signs of wear or damage to ensure the sealer remains in good working condition.

• 7. Safety Precautions

• Avoid Contact: Be cautious around the heating elements to avoid burns.
• Follow Manufacturer Guidelines: Adhere to all safety recommendations provided by the manufacturer.